• Every driver must complete a Forklift Daily Inspection checklist before utilizing the machine.

• Any faults found during the checks must be recorded on the checklist and reported to management before utilizing the machine.

• Management will confirm if the machine can still be used.
   

OPERATIONAL SAFETY CHECKS

• Watch out for pedestrians.
• Ensure the lifting tines are secure into the pallet and the load is stable before lifting or driving off.
• Be careful of ceiling clearance or overhead obstructions when raising the mast.
• Always remember that the safe working load of a forklift reduces as the mast is tilted forward.
• Always put the heavy end of the load against the load backrest.
• When approaching a blind corner or approaching a door/entrance way, use horn and drive slowly.
• Always have someone guide you if a load restricts your vision.
• Slow down when changing direction or on wet or greasy surfaces.
• Avoid harsh braking, especially when carrying a load.

ENDING OPERATIONS AND CLEANING UP

• When stopping the forklift:
• Park on even ground and lower the forks to the ground.
• Shift the gear selector to park position and apply the parking brake.
• Turn off the ignition and remove the keys.

DON’T

• Do not use faulty equipment. Report any faults immediately.
• Do not allow any passengers to ride on the forks.
• Do not lift a load with the mast tilted forward.
• Do not travel with forks raised or reach mechanism extended.
• Never travel with the load elevated.
• Do not attempt to turn on an incline or sloping surface.
• Do not dismount from a forklift while the engine is running unless the vehicle has completely stopped, transmission is in park position, and the parking brake is effectively engaged.
• Do not leave forks elevated when forklift is unattended.
• Do not refuel an engine-powered forklift unless the motor is stopped, and ignition turned off.
• Do not lift a safety cage without it being chained and if the occupants are not using safety harness.